Features

• Like looking into an aquarium with a colorful underwater world. Practical with a drain plug
• Room for the whole family, including repair parts
• -The base of the pool must be absolutely flat and even. Do not place the pool on a slope or an inclined surface. - Do not place the pool on mud, sand, soft or loose soil. - Place a protective cushion between the selected area and the pool (not included, sold separately)
• -First inflate the lower air chamber using a manual air pump specially designed for inflatable products, then inflate the next chamber or chambers in turn. - Do not inflate the product too much. Fill the product with air until the surface is firm but not hard. If there is tension at the seams, the product is too swollen. If a seam starts to stretch, immediately stop inflating the seam and release the air to reduce pressure until there is no sign of tension on the seam. Do not inflate too much or use a high pressure air compressor as this may cause gasket leaks.
• -Close and immerse all inflation valve caps securely by pressing firmly on them. Place the product on a clean, flat surface with no sharp objects that could pierce it. - Remove all hard, sharp, and loose objects such as jewelry, watches, buckles, keys, shoes, hairpins, etc. from users before using or entering the pool.
• -Dry the product thoroughly and store it in a safe place when not in use. Bend the product loosely and avoid sharp creases, corners, and creases that could damage the appliance. - Pools are subject to wear and tear. Maintain your pool properly. Some types of excessive or rapid deterioration can cause the pool to fail. A pool failure can cause large amounts of water to leak out of the pool.
• NOTE The user manual is included with the product.

Product info

• Color: Multicolor
• Size: 159 cm l x 159 cm w x 50 cm h
• Contributors: Intex
• Binding: Toy
• Brand: Intex
• Languages: English
• Dimensions:
  • Height: 19.69 inches
  • Width: 62.60 inches
  • Length: 62.60 inches
  • Weight: 0.00 Pounds
• Released: February 7, 2011